Volume of Hollow Cylinder Calculator
Enter the inner and outer diameters (or radii) and the height to find the volume of a pipe or tube.
Updated
Volume of Hollow Cylinder Calculator
Our Volume of Hollow Cylinder Calculator finds how much material is in a pipe, tube or ring from its inner size, outer size and height. Enter diameters or radii. It shows the working, the exact answer in terms of π, the wall thickness, the outer and hole volumes, the surface area, the volume in other units and a drawing to scale.
Quick answer
The volume of a hollow cylinder is V = πh(R² − r²). With an outer diameter of 14 cm (R = 7), an inner diameter of 10 cm (r = 5) and h = 10 cm: V = 240π ≈ 753.98 cm³.
- R and r: the outer and inner radii, half of each diameter
- h: the height, or the length of a pipe lying flat
- Same as: the outer solid cylinder minus the cylinder of the hole
- Units: the volume is in cubic units, so cm gives cm³ (1,000 cm³ = 1 litre)
What Is a Hollow Cylinder?
A hollow cylinder, or cylindrical shell, is a cylinder with a smaller cylinder removed along its axis. Its ends are rings (annuli) between an outer circle of radius R and an inner circle of radius r, and the height h runs between the two ends. Pipes, tubes, straws, bushings, concrete rings and paper towel cores are hollow cylinders. Its volume is the space taken up by the material of the wall, not the empty space inside.
Hollow Cylinder Volume Formula
Square both radii, subtract the inner from the outer, then multiply by π and the height. The same volume can be written in other ways:
- With diameters: V = πh(D² − d²) ÷ 4
- With wall thickness: V = πh(R + r)t, where t = R − r
- Surface area: 2π(R + r)(h + R − r), inside, outside and both rings
R = 7, r = 5
R² − r² = 49 − 25 = 24
V = π × 10 × 24
V = 240π ≈ 753.98 cm³
When r = 0 there is no hole and the formula gives the solid cylinder πR²h. See the Volume of Cylinder Calculator.
Why the Formula Works
Fill in the hole and you have a solid cylinder of radius R. The hole is itself a cylinder of radius r with the same height. Take the hole away from the solid one and what is left is the wall of the tube.
Hole: π × 5² × 10 = 250π
Tube: 490π − 250π = 240π
Both cylinders share π and h, so πR²h − πr²h = πh(R² − r²). Each end is a ring of area π(R² − r²), and the tube is a stack of those rings to height h.
Finding the Weight of a Pipe
Multiply the volume by the density of the material. Steel is about 7.85 g/cm³, so the 240π cm³ tube above weighs:
m ≈ 753.98 × 7.85
m ≈ 5,918.76 g ≈ 5.92 kg
To find how much a pipe holds instead, use the inner radius alone: the hole volume πr²h (shown as Hole in the calculator). A 1 m pipe with r = 5 cm holds 2,500π ≈ 7,854 cm³, about 7.85 litres.
Hollow Cylinder Volume Examples
| R, r, h | Volume |
|---|---|
| 7, 5, 10 cm | 240π ≈ 753.98 cm³ |
| 5.5, 5, 100 cm | 525π ≈ 1,649.34 cm³ |
| 3, 2, 8 in | 40π ≈ 125.66 in³ |
| 10, 9.5, 20 cm | 195π ≈ 612.61 cm³ |
| 0.6, 0.5, 1 m | 0.11π ≈ 0.3456 m³ |
These are a textbook example, a 1 m plastic pipe, a bushing, a thin walled can and a concrete well ring. The exact answer is a multiple of π; the decimal is rounded.
Common Mistakes
- Using diameters as radii: π × 10 × (14² − 10²) ≈ 3,015.93 cm³ is four times too big. Halve them first, or divide by 4.
- Subtracting before squaring: π(R − r)²h = 40π is wrong. Square each radius, then subtract: R² − r².
- Mixing up thickness and radius: the wall thickness is R − r. With R = 7 and t = 2, the inner radius is 5.
- Inner larger than outer: the hole must be smaller than the outside, or there is no wall.
- Mixing units: convert so the radii and height are all in the same unit before multiplying.
Key Terms
- Hollow cylinder
- A cylinder with a coaxial hole, such as a pipe.
- Outer radius
- R, half the outside diameter D.
- Inner radius
- r, half the inside diameter d (the bore).
- Wall thickness
- t = R − r, the thickness of the material.
- Annulus
- The ring shaped end, of area π(R² − r²).
How to Use the Volume of Hollow Cylinder Calculator
- Choose diameters or radii. Pick Diameters to enter the sizes across the tube, or Radii to enter half of them. Switching converts what you typed, so the tube stays the same.
- Enter the sizes and height. Type the inner size, the outer size and the height (or length), such as 10, 14 and 10. Pick a unit if you want one (mm, cm, m, km, in, ft, yd or mi). All three use the same unit.
- Read and copy the result. The volume appears as you type, with the working, the exact answer in terms of π, the wall thickness, the outer and hole volumes, the surface area and the volume in other units. Press Copy to copy it, or Clear or Esc to start again.
Example: a plastic pipe is 1 m long with an outer diameter of 11 cm and an inner diameter of 10 cm. Enter 10 and 11 for the diameters and 100 for the height, and pick cm. The volume of plastic is 525π ≈ 1,649.34 cm³.
Who Can Use This Calculator?
Frequently Asked Questions (FAQs)
What is the formula for the volume of a hollow cylinder?
V = πh(R² − r²), where R is the outer radius, r is the inner radius and h is the height. With R = 7 cm, r = 5 cm and h = 10 cm: V = π × 10 × (49 − 25) = 240π ≈ 753.98 cm³.
How do I find the volume of a hollow cylinder from diameters?
Use V = πh(D² − d²) ÷ 4, or halve both diameters and use πh(R² − r²). An outer diameter of 14 cm, inner diameter of 10 cm and height of 10 cm give π × 10 × (196 − 100) ÷ 4 = 240π ≈ 753.98 cm³.
How do I find the volume of a pipe?
A pipe is a hollow cylinder lying on its side, so use its length as h. A 1 m plastic pipe with an outer diameter of 11 cm and an inner diameter of 10 cm has 525π ≈ 1,649.34 cm³ of plastic.
How much water does a pipe hold?
Use the inner radius only: πr²h. A 1 m pipe with an inner radius of 5 cm holds π × 25 × 100 = 2,500π ≈ 7,854 cm³, about 7.85 litres. The calculator shows this as the Hole row.
How do I find the weight of a hollow cylinder?
Multiply the volume by the density of the material. A steel tube of 240π ≈ 753.98 cm³ at 7.85 g/cm³ weighs about 5,918.76 g, or 5.92 kg.
What if I only know the wall thickness?
The inner radius is the outer radius minus the thickness: r = R − t. Then V = πh(R + r)t. With R = 7 cm, t = 2 cm and h = 10 cm: r = 5 and V = π × 10 × 12 × 2 = 240π.
How do I find the surface area of a hollow cylinder?
Add the outside 2πRh, the inside 2πrh and the two rings 2π(R² − r²). Together that is 2π(R + r)(h + R − r). See the Surface Area of Hollow Cylinder Calculator.
Is the Volume of Hollow Cylinder Calculator free?
Yes. It is completely free, needs no sign-up, and can be used as many times as you like.
Try our Volume of Hollow Cylinder Calculator to get the volume of a pipe or tube from its diameters and height.