Area of Ellipse Calculator

Enter the semi-major and semi-minor axes of an ellipse to find its area.

Updated

Enter to calculate Esc to clear

Area of Ellipse Calculator

Our Area of Ellipse Calculator multiplies π by the two semi-axes to give the area of any ellipse or oval in square units. It also shows the exact value in terms of π, the full axes, the perimeter, the eccentricity and the area in other units.

Quick answer

The area of an ellipse is A = πab: π × 5 × 3 = 15π ≈ 47.12 cm².

  • a and b: the semi-major and semi-minor axes, half the longest and shortest widths
  • From the full axes: halve them first, so 10 cm by 6 cm gives π × 5 × 3 ≈ 47.12 cm²
  • Semi-axis from the area: b = A ÷ (πa), so 100 m² with a = 8 m gives b ≈ 3.979 m
  • Circle check: when a = b = r, πab becomes πr²

What Is an Ellipse?

An ellipse is a stretched circle, the smooth oval you see when you look at a round plate from an angle. It has two lines of symmetry that cross at its centre:

  • Major axis: the longest width, edge to edge through the centre (2a).
  • Minor axis: the shortest width, at right angles to it (2b).

Half of each is a semi-axis. The semi-major axis a and the semi-minor axis b are all you need for the area.

An ellipse with its dashed major axis of 10 across and minor axis of 6 down, crossing at the centre minor axis 2b = 6 major axis 2a = 10
The axes cross at the centre at right angles. Here a = 5 and b = 3.

Area of an Ellipse Formula

A = π × a × b = πab
A = π × D × d ÷ 4
An ellipse with the semi-major axis a and the semi-minor axis b drawn from the centre, and A = πab inside a b A = πab
a and b run from the centre to the edge. Area = π × a × b.
  1. Find the semi-axes. Measure from the centre to the edge along each axis, such as a = 5 cm and b = 3 cm.
  2. Multiply them. 5 × 3 = 15 cm².
  3. Multiply by π. 15 × 3.14159 ≈ 47.12 cm².

Leave the answer as 15π cm² for an exact value. In the second form, D and d are the full major and minor axes.

Why the Area Is πab

Start with a circle of radius b. Its area is πb². Stretch it sideways until its width is a instead of b: every horizontal strip gets a ÷ b times longer, so the area does too.

A circle of radius b on the left stretched sideways by a over b into an ellipse on the right b × a/b πb² πb² × a/b = πab
Stretching only the width multiplies the area by a ÷ b.

πb² × (a ÷ b) = πab. The same idea shows that an ellipse always fills π ÷ 4, about 78.54%, of the 2a by 2b rectangle drawn around it.

An ellipse filling about 78.54 percent of the 2a by 2b rectangle drawn around it ≈ 78.54% 2a 2b
πab ÷ (2a × 2b) = π ÷ 4, for every ellipse.

Ellipse Area Examples

abArea
1 m1 m≈ 3.14 m² (a circle)
2 m1 m≈ 6.28 m²
4 cm2 cm≈ 25.13 cm²
5 cm3 cm≈ 47.12 cm²
6 m4 m≈ 75.4 m²
10 ft6 ft≈ 188.5 ft²

Doubling one semi-axis doubles the area. Doubling both makes it 4 times bigger, just like a circle.

Area From the Full Axes

A tape measure usually gives the full length and width of an oval, not the semi-axes. Halve both, then use πab:

a = 8 ÷ 2 = 4 ft
b = 5 ÷ 2 = 2.5 ft
A = π × 4 × 2.5 ≈ 31.42 ft²

That is an 8 ft by 5 ft oval rug: exactly 10π ft².

Semi-Axis From the Area

Know the area and one semi-axis? Divide the area by π times the one you know:

b = A ÷ (π × a)
100 ÷ (π × 8) ≈ 3.979 m

So an oval lawn of 100 m² that is 16 m long is about 7.96 m wide.

Perimeter of an Ellipse

Unlike the area, the distance around an ellipse has no simple exact formula. The calculator uses Ramanujan's approximation, which is accurate to well under 0.01% for everyday shapes:

h = (a - b)² ÷ (a + b)²
P ≈ π(a + b)(1 + 3h ÷ (10 + √(4 - 3h)))

For a = 5 and b = 3 that gives P ≈ 25.527. For more detail, use the Perimeter of Ellipse Calculator.

Common Mistakes

  • Using the full axes as a and b. The answer comes out 4 times too big.
  • Averaging the axes. π × ((a + b) ÷ 2)² is a little too big unless a = b.
  • Mixing units. Convert both semi-axes to the same unit first (the calculator does this for you).
  • Forgetting square units. The answer is 47.12 cm², not 47.12 cm.

Key Terms

Semi-major (a)
Centre to edge along the long axis.
Semi-minor (b)
Centre to edge along the short axis.
Eccentricity
How stretched it is, 0 for a circle.
Pi (π)
About 3.14159.

How to Use the Area of Ellipse Calculator

  1. Enter the semi-major axis. Type a, the distance from the centre to the edge along the long axis, such as 5. If you measured the full length, halve it first.
  2. Enter the semi-minor axis. Type b, the distance from the centre to the edge along the short axis, such as 3. Pick a unit for each if you want one (mm, cm, m, km, in, ft, yd or mi); mixed units are converted.
  3. Read and copy the result. The area appears as you type, with a drawing to scale, the working, the exact value in terms of π, the full axes, the perimeter, the eccentricity and the area in other units. Press Copy to copy it, or Clear or Esc to start again.

Example: an oval table is 2.4 m long and 1.6 m wide. Enter a = 1.2 and b = 0.8 and pick m. The area is about 3.015929 m² (0.96π m²) and the perimeter is about 6.346176 m.

Who Can Use This Calculator?

Home and DIYOval tables, rugs, mirrors and pools
Gardening and LandOval beds, lawns, ponds and tracks
Engineering and DesignElliptical parts, ducts, arches and CAD work
Students and TeachersEllipses, conic sections and geometry homework

Frequently Asked Questions (FAQs)

How do you find the area of an ellipse?

Multiply π by the semi-major axis a and the semi-minor axis b. An ellipse with a = 5 cm and b = 3 cm has an area of π × 5 × 3 = 15π ≈ 47.12 cm².

What is the formula for the area of an ellipse?

A = πab, where a and b are the semi-axes and π ≈ 3.14159. With the full axes D and d it is A = πDd ÷ 4.

How do you find the area of an oval?

Treat the oval as an ellipse: halve its length and width to get a and b, then use πab. An 8 ft by 5 ft oval rug is π × 4 × 2.5 ≈ 31.42 ft².

What are the semi-major and semi-minor axes?

The semi-major axis a is half the longest width of the ellipse, from the centre to the edge. The semi-minor axis b is half the shortest width, at right angles to it.

How do you find a semi-axis from the area?

Divide the area by π times the other semi-axis: b = A ÷ (πa). An area of 100 m² with a = 8 m gives b ≈ 3.979 m.

Is a circle an ellipse?

Yes. A circle is an ellipse with a = b = r, so πab becomes πr² and its eccentricity is 0.

Is there a formula for the perimeter of an ellipse?

Not a simple exact one. Ramanujan's approximation P ≈ π(a + b)(1 + 3h ÷ (10 + √(4 − 3h))), with h = (a − b)² ÷ (a + b)², is very accurate. For a = 5 and b = 3 it gives about 25.527.

Does it matter which axis I enter as a?

Not for the area, since π × a × b is the same either way. The calculator notes when b is the longer one and uses it as the semi-major axis for the eccentricity.

Is the Area of Ellipse Calculator free?

Yes. It is completely free, needs no sign-up, and can be used as many times as you like.

Try our Area of Ellipse Calculator to find the area of any ellipse or oval from its two semi-axes, in any units.